Monday 26 September 2022

Tornado Cleaning Brush Circuit

Introduction
This
micro-blog presents the electronics circuit and motor part number details for a well-known battery-powered cleaning brush.

Electronics
The product design consists of a DC motor, rechargeable battery and associated battery charge monitor. Provided with the product is an external mains power adaptor as the recharging source.

DC Motor from Cleaning Brush
DC Motor from Cleaning Brush

The motor is rated at DC 3.6 V, part number RS390SH-6213. A similar motor can be sourced at companies such as AliExpress.

Powering the motor during the use of the cleaner is a standard Li-Ion battery (18650) with a rating of 3.7 V 2.2 AH.

Monitoring the charge state of the Li_Ion battery is an unidentified chip. The part number on the 8-pin chip (SOIC-8) was removed by linishing or a similar process.

Top Side of Cleaning Brush Circuit Board
Top Side of Cleaning Brush Circuit Board

Bottom Side of Cleaning Brush Circuit Board
Bottom Side of Cleaning Brush Circuit Board

The circuit containing the unidentified chip is displayed below.

Cleaning Brush Circuit
Cleaning Brush Circuit

No comments:

Post a Comment